Cleaning a glass shower door with common household objects is easy when you follow these steps.
In order to clean a glass shower door, you’ll need to be familiar with the process. Limescale and soap scum build up on these glass panels over time, making them seem pristine when they are new. In addition, if kept filthy for a long period of time, it might become unattractive and unappealing to visitors.
With the correct chemicals, removing limescale is a reasonably straightforward process, all of which you may already have on hand. Do not make this error if you often use bleach in your cleaning routines. To restore the sparkle to a glass shower door, follow these instructions.
How to use vinegar to clean a shower door that is made of glass
Pour half white distilled vinegar and half water into a spray container that has been emptied. Use white vinegar; malt vinegar will work, but you won’t like the fragrance as much. Dish soap may also be added to the solution if there is a lot of soap scum on the glass.
Put the cover on tightly and mix the ingredients together.
Spray your shower door generously, working your way from top to bottom. Because your bathroom will smell strongly after using this vinegar solution, open a window or a door to let fresh air into the room.
You may use a moist microfiber cloth to remove limescale on a daily basis.
Allow the solution to settle for a few minutes before gently scrubbing with a non-scratch sponge to remove more stubborn limescale. Despite the fact that you may have to reapply, you should see the watermarks go away.
Rinse, dry, and polish the glass with a clean microfiber towel after cleaning.
How to use baking soda to clean a glass shower door
It is possible to use baking soda as an alternative. Baking soda is an excellent natural abrasive for eliminating limescale. Scrub the glass in a circular motion with a damp microfiber cloth and baking soda.
After that, all you have to do is remove the residue with a clean microfiber cloth and run water over it.
The scouring side of a moist sponge may be used to apply baking soda to recalcitrant limescale.
Always clean and dry your glass after use to avoid further limescale buildup.
Once again, your shower door should be shining brightly. You can maintain it looking its best by following these recommendations.
How to prevent watermarks from forming on the door of your shower
- To ensure that the water drains in the correct direction, use a squeegee after each shower. If you don’t already have one, we suggest the MR.SIGA Multi-Purpose Silicon Squeegee ($9.99, Amazon). With a window vacuum cleaner, you can clean and dry the glass simultaneously.
- Using a towel, buff the glass dry, even if you’ve used a squeegee to remove any remaining water from the surface. To avoid watermarks, all it takes is a few seconds to do this simple task.
- If you have a window in your bathroom, keep it open after bathing to allow the humidity to escape. As a result, your shower will stay dry and mould and mildew will not grow in your bathroom. For the same reason, leave the shower door open.
- Shower cleansers that help prevent limescale and mildew formation, such as Clean Shower ($19.99 on Amazon), should be used on a regular basis. Note that they aren’t cleaning agents; rather, they’re meant to help you maintain your shower clean and free of limescale buildup.
- While it may be tempting to throw a wet towel over the glass door after wiping out the shower, doing so may trap moisture against the surface, resulting in the formation of limescale. Instead, use a towel rack to hang it.