If you can’t rest your iPhone through Settings, iphone in dfu mode is your best option. Here’s how to enter dfu mode on an iPhone. Your iPhone will be fully idle in DFU mode. Your iPhone’s data and settings will be completely erased. Therefore, if you can, it is advised to back up your data.
One of the best iPhones available right now may be Apple’s newest model, the iPhone 14 Pro. However, iPhone 14 Pro had the most issues with iOS 16. One of the most prevalent problems involved the iPhone 14 Pro camera wobbling while using Snapchat, TikTok, or Instagram. Knowing that the iPhone 14 Pro would not be as simple to fix made us sad.
How then do you activate DFU mode on your iPhone? You can put an iPhone in DFU mode with the help of this simple technique.
What Is DFU Mode?
DFU stands for Device Firmware Update, and this is a special mode built into the Apple mobile operating system (iOS). It is an advanced recovery mode, as it fixes problems that are found in the firmware as well as the software.
In this mode, your iOS device is powered on, but your operating system isn’t booted up, so you can alter the operating system. Here, your device will interact with Finder or iTunes on a Mac or Windows computer without it automatically updating your iOS version.
Using DFU mode, you can upgrade or downgrade your iOS version, update from a beta version, and jailbreak your iPhone—or un-jailbreak your iPhone.
This is a useful last-resort fix to rule out software problems, and it’s an effective way to restore a device that is stuck on Apple’s logo, buggy, or unresponsive. Entering this mode is tricky, though, as it requires precise timing and multiple steps.
But don’t fret. If you follow the detailed instructions in the sections below, you’ll be able to use DFU mode successfully.
Does DFU Mode Delete iPhone Data?
Unfortunately, if you use this mode to install something or restore your device, all of your iPhone’s data will be erased. This works similarly to the iTunes restore method, which also deletes all of your data.
It completely erases your iPhone, erasing all of your videos, photos, messages, apps, and even the previously configured settings. When you’re finished with this mode, you’ll have to reset your device to use it. We recommend backing up your files before entering DFU mode, then restoring them after the process.
How to Put an iPhone in DFU Mode?
If you cannot rest your iPhone through the settings, you can try to rest it using DFU mode. You will need to follow a different set of steps to reset your iPhone 8 or later than an iPhone 7. You will also need to have access to a Mac or PC to put an iPhone 7 in DFU Mode. Here is how to put an iPhone in DFU mode.
How to Put iPhone 8 or Later in DFU Mode?
It is important that you put your iPhone in DFU mode in the correct manner. If done in the wrong way, your iPhone can be damaged. Here is an easy step-by-step guide on how to put an iPhone in DFU mode for iPhone 8 or later.
1. Quickly press and release the volume up the bottom. Then press and release the volume down button.
2. Long-press the side key and hold it till your iPhone’s screen goes black.
3. Once the screen goes black, hold the volume down and side keys simultaneously.
4. After about 5 seconds, release the side key and keep holding the volume down key.
5. Release the volume down key once your iPhone is visible on iTunes or Finder.
6. Once you see your iPhone in iTunes or Finder, release the volume key.
Now, your iPhone is in DFU mode. You can now restore your iPhone with the help of iTunes or Finder.
Also, read The DASH Diet: A Complete Overview and what you can eat
How to Put iPhone 7 or Older in DFU Mode?
If you want to put an iPhone 7 or older in DFU Mode, here is how you can do that. You will need a Mac to put your iPhone in DFU mode and then restore it successfully. Here is how to put an iPhone in DFU mode for iPhone 7 or older models.
1. Connect your iPhone to a Mac.
2. Open iTunes on your Mac operating on macOS Mojave 10.14. Open Finder on your Mac operating on macOS Catalina 10.15 or later.
3. Now, press and hold the Sleep /Wake Button Home Button for 8 seconds. If your iPhone does not have a home button, press the Sleep/ Wake button and the volume down key for 8 seconds.
4. Release the Sleep/ Wake keys but keep holding on to the home key (iPhone 6s or older) or volume down key(iPhone 7) after 8 seconds till you can see your iPhone on iTunes or Finder.
5. Now, let go of the Home or volume down key. You have successfully entered DFU mode, your iPhone screen will be completely black. If not, you will have to begin again.
6. If you successfully entered DFU mode, restore your iPhone using iTunes or Finder.
In this way, you can put your iPhone 7 or older in DFU Mode.
Also, read Google Pixel tablet is coming — everything we know so far
What is DFU Mode on iPhone?
DFU mode is also known as the Device Firmware Update. It is usually your last resort to recover your iPhone. When an iPhone has a minor inconvenience, you might need to rest it. If, for some reason, you are unable to reset your iPhone from the setting, you need will need to put it in DFU mode.
DFU mode acts as a recovery mode. Your iPhone won’t be wiped clean of the iOS. But it will be accessible to iTunes and Finder. You can then restore your iPhone using your Apple account. Most Apple executives will restore your iPhone using DFU mode when you take it to the Apple Store. But here is something you should keep in mind if you are trying to put your iPhone in DFU mode on your own.
Also, read Advanced dog training tips for beginners [updated 2022]
Word of Caution for DFU Mode
If you are trying to put your iPhone in DFU mode, make sure you do it in the right way. DFU mode will put your iPhone in recovery mode. Many people who have been using iPhones for a really long time prefer to use DFU mode to rest their iPhones. Apparently, putting your iPhone in DFU mode works better than doing a factory rest.
It’s best to be really careful if you are trying to put your iPhone in DFU Mode. If you cannot finish the entire process due to water damage, your iPhone might become completely useless. So, make sure you follow the steps in the right manner. You will have to follow different methods for iPhones with a home button than for an iPhone without one.
Also, read 25+ Undeniable Signs to know if a guy likes you Deeply
Wrapping Up
You now understand how to enter iphone in dfu mode. For an iPhone with a Home button and one without, you will need to follow a slightly different set of instructions. The best way to recover your iphone in dfu mode is when done correctly. If you can reset your iPhone through Settings, it is not advised that you do so.
What is dfu mode?
In order to enter DFU mode on your iPhone 12/12 Pro simply: Press and release the Volume Up button on your iPhone. Right after that press and release the Volume Down button. Thereafter press and hold the side button for about 10 seconds until the screen turns black.
How do I activate the DFU mode on an iPhone SE?
Which iPhone SE?
iPad, iPhone 6s and below, iPhone SE (2016) and iPod touch
Connect the device to a computer using a USB cable.
Hold down both the Home button and Lock button.
After 8 seconds, release the Lock button while continuing to hold down the Home button. If the Apple logo appears, the Lock button was held down for too long.
Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode. If your device shows a screen telling you to connect the device to iTunes, retry these steps.
For iPhone SE (2020)
Turn on your iPhone if it isn’t already.
Connect it to your computer using a Lightning to USB cable.
On your iPhone, press the Volume Up button immediately followed by the Volume Down button.
Next, press and hold the Side button(or power button) until your iPhone’s screen turns black.
Release the Side button and then hold down both the Side button and Volume Down button together for approximately five seconds.
Now release the Side button, but continue to press the Volume Downbutton. The screen should remain black.
Wait for Finder to automatically launch. You’ll see a message prompt saying Your Mac has detected an iPhone in recovery mode. You must restore this iPhone before it can be used.” If you don’t see the message, repeat the steps above.
How to put my iPhone in DFU mode with a power button
Removing the physical mute switch means the mute switch has to be built into the software. While this works for most people, it may not be ideal in some scenarios:
In bed, in darkness. Flicking the switch gives tactile confirmation that the alarm ringer is on/off. Turning on the phone to switch it will probably blind you and perhaps damage your eye.
In a Theater/Movie Theater. Turning on your phone could be disruptive to other viewers, especially if you’re the type of person who uses max brightness on their phones.
During a meeting or while talking to people. The mute switch is significantly lower profile and less obtrusive. Opening up your phone can be seen as rude or disruptive.
Checking if your phone is silent without having to open it. Seeing the physical mute switch gives you visual confirmation without having to pick up and fiddle with the phone.
On iOS 13, how do I put my iPhone into DFU mode?
Sometimes we may use iPhone DFU mode to restore an iPhone in order to toubleshoot some iOS related problems. However, it’s not an easy thing to put iPhone into DFU mode, especially for some new iOS users. Now the following is the quick guide to show you how to manually enter DFU mode on iPhone XS (Max), XR.
Tools you need: A computer (PC or Mac), iTunes app (newest version) and an original USB cable
Procedures:
Step 1. Connect your device to the computer with a USB cord;
Step 2. Launch the latest version of iTunes program on the computer;
Step 3. Press and release Volume Up button, and then press and release Volume Down button;
Step 4. Now press and hold the Power button until your phone screen turns black (it usually takes 10 seconds or so);
Step 5. While still holding the Power button, now press and hold both Power and the Volume Down button for 5 seconds;
Step 6. Release the Power button but continue to hold Volume Down button for another 10 seconds;
Step 7. iTunes should pop-up an alert message saying “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes” indicating the iPhone XS/XR is in DFU mode.
How do you get into DFU mode on an iPhone 7?
Shut down the phone, then when it’s off, press the power button for three seconds and then while holding a power button, hold the volume down button. Hold both for 10 seconds. The screen will remain off but the phone will be on DFU.
What happens if you put your iPhone in DFU mode?
The primary reason people need to access DFU mode on their iPhone is to update or change the firmware and iOS on the device, either out of troubleshooting requirements, or personal preference. This can serve to restore a bricked iPhone where updating iOS has failed and the phone is seemingly broken, but it can also be used sometimes to downgrade to a prior iPhone firmware and operating system. In some unique situations,
How do I fix my iPhone stuck in DFU mode?
Fix iPhone 8/8 Plus, iPhone X, iPhone 11, and iPhone 12,iPhone 13 stuck on Apple logo in DFU mode, you can follow these steps:
Plug your iPhone 12 or iPhone 13 into your Mac or PC.
Make sure iTunes/Finder is running.
Press and release the Volume Up button quickly.
Press and release the Volume Down button quickly.
Then hold the Power/Slide button until the screen goes black.
Then press and hold the Volume Down button while continuing to hold the Side button.
After 5 seconds, release the Side button but continue to hold the Volume Down button, until you see the “iTunes has detected an iPhone in recovery mode.” popup.
How to fix an iPhone 5s showing ‘Unable to Activate
Remove your SIM card and continue the setup, make sure you’re connected to WiFi, and replace the SIM once you’re back at the home screen. If that doesn’t work, your SIM card will need to be replaced.
How to restore my iPhone in DFU mode without iTunes
Steps to Restore iPhone in Recovery Mode without Data Loss on iOS 15/14/13
Step 1: Open Dr.Fone on your computer. Once the program loads, click on “System Repair.”
Step 2: Connect your iPhone to your computer and click on the “iOS Repair” tab. In the lower right corner, you can see two options: Standard Mode and Advanced Mode. Click on the first one.
How do you put your iPhone in recovery mode?
It is simple for the iphone to enter recovery mode.
Method 1, Connecting your iphone to your PC. Run iTunes. Then press and hold the volume down key, which can help you easily enter recovery mode.
Method 2, If this traditional method cannot get your phone into recovery mode, then you need iOS System Repair software to help you. At this time you need to turn off iTunes and run TunesKit iOS System Recovery, which is a very safe system repair software developed by a professional Apple team.